Package Download Link: GCK Service Pack 5 Hot Fix 6

IEDnet Installer Download Link: IEDnet Installer

GCK Updater Installer Download Link: GCK Updater Installer

• This release serves as an update to GCK Service Pack 5
• GCK Service Pack 5 must be installed before applying this hotfix.
• Previous GCK Service Pack 5 HotFixes do not need to be applied before installing this hotfix, all previous SP5 hotfix changes are incorporated into hot fix 6.
• This is a single package release that supports both 32 bit and 64 bit operating systems. 

Installation Instructions:

1. Download the GCK Service Pack 5 Hot Fix 6 package and the GCK Updater installer. (If you are updating GCK v5.3 or older, also download the IEDnet installer.)
2. Run the Updater installer.
3. Apply the GCZ package. (If you are updating GCK v5.3 or older proceed to steps 4-6.)
4. Copy the IEDnet installer to the desktop of the device being updated.
5. Run the IEDnet installer with all the default options.
6. Once the installer completes, reboot.

SP5 Hot Fix Changes:

• SMC v5.5.1 (2.1.6821.32114)
  • HF5: Fix ToneSchedule issue if the day only contains ad-hoc schedules. 
  • HF5 (4119): Fix ability to monitor 9116 zones. 
  • HF5: Fix ability to configure 528SK actions. 
  • HF5: Fix issue sending test points to Titan frames.
  • HF5 (4100): Improve support of large ToneSchedules.
  • HF4: Support the ability to configure the SIP AuthorizaionID.
  • HF4: Support for T9160MT48 devices.
  • HF4: Fixed the ability to read in the nighttime offset level.
  • HF3: Fixed the erroneous "offline" reporting.
  • HF2 (3964): Do not show the "verify IP" warning for routable devices.
  • HF2 (3963): Configuration strings are being overwritten when discovering and replacing devices.
  • HF2 (3962): Not loading background images on 550 templates.
  • HF2 (3960): Not changing IP addresses on DNA's and/or 550's when you press OK and Save.
  • HF1 (3898): Allow users to manually adjust the calibration constant on the DNA ambient form.
  • HF1 (3937): Problems loading titan mon/test data from the XML.
  • HF1 (3954): Fix ability to export takes ("Recorded Messages" and "Chimes").
  • HF1 (3955): Allow Cobranet monitor route to stay active after the monitor window is closed.

• vACS v2.6.6.0
  • HF6: Set TTL on RTP packets to 254.  
  • HF6: Move some Cobranet sound card comms to SNMP to avoid calls to the driver that show a higher rate of failure. 
  • HF6: Send a single set multiple properties SNMP message to DNA's when routing/unrouting. 
  • HF5 (4100): Improve support for large ToneSchedules. 
  • HF5: Fix unicast RTP to remote vACS systems.
  • HF4: Improve reliability of Delayed/RecordTake actions by setting up the entire Cobranet receiver for every announcement.
  • HF4: Use message mode IEDnet pipes.
  • HF3: Fixed the ability for IEDnet to callback after a device times out.
  • HF3: Fix erroneous "offline" reporting (Remove debug and error messages sent through the regurgitator service.
  • HF3: Fix erroneous "offline" reporting (change methods for interfacing with IEDnet service).
  • HF3: Remove duplicates from the announcement zone list.
  • HF3 (4000): Cannot init actions from a mic after using that mic to ack a SAFE zone.
  • HF3 (3966): Fix "Yearly" scheduled actions.
  • HF3: Allow users to log in to mic stations with passwords that are < 4 digits.
  • HF3 (3965): Send the Announcement Complete report (1000/3) after a visual only announcement.
  • HF1 (199): Failover to the LL if the Cobranet sound card faults.
  • HF1 (3900): Remove the limitation on the number of simultaneous calls from the internal TEL.
  • HF1 (3904): Actions that repeat with X minutes between plays are timed incorrectly.
  • HF1 (3952): Multi-byte visual characters are not sent to remote systems correctly.
  • HF1 (3953): The text displayed by the remote system does not match the audio on multi-ACS PDRP announcements.

• Device Config Service v2.0.1.100
  • HF6: Fixed ability to monitor 1502AO devices. 
  • HF5: "Resolve" button support. 
  • HF4: Support for T9160MT48 devices.
  • HF4: Use message mode IEDnet pipes.
  • HF1 (3893): Fix "program" meter on the titan ambient screen.
  • HF1 (3938): Service loses communication to a titan during a set/test.

• vACS Discovery Service v2.0.3.2
  • HF5: Provide exe.config setting to control resetting 524 mic. 
  • HF4: Support for T9160MT48 devices.
  • HF4: Use message mode IEDnet pipes.
  • HF2 (3959): Service occasionally stops discovering Cobranet devices.

• Regurgitator v1.5.3.102
  • HF5 (4100): Improve support for large ToneSchedules. 
  • HF4: Use message mode IEDnet pipes.
  • HF3: Remove IEDnet locks and hooks used to support the SMC's version of NetMon.

• Globalcom Data Service v1.2.1.3
  • HF6: Improved logic for getting GCK version and service versions. 
  • HF4: Support for T9160MT48 devices.
  • HF4: Support the ability to configure the SIP AuthorizaionID.

• Front Panel Service v1.1.4.1
  • HF4: Use message mode IEDnet pipes.

• Telephone Service 3.0.4.2
  • HF4: Support the ability to configure the SIP AuthorizaionID.

• System Supervision Service v1.7.4.101
  • HF6: Stopped using threads to lookup fault information. 
  • HF6: Improved device polling and error handling. 
  • HF5 (4103): Stop bouncing fault triggered relays. 
  • HF4: Use message mode IEDnet pipes.

• LIR Service v1.2.0.3
  • HF4: Use message mode IEDnet pipes.

• Intercom Service v1.2.0.3
  • HF4: Use message mode IEDnet pipes.

• IEDnet (I_Base32) v2.1.1.2
  • HF4: Use message mode IEDnet pipes.
  • HF3: Improve service error handling.

• SNMP Agent v1.0.0.1
  • HF6: Fixed ability to lookup local IP address on IP108 boxes.